mirror of
https://github.com/qmk/qmk_firmware.git
synced 2025-07-25 18:41:14 +00:00
e83b709169
* Kobold r1 * Apply suggestions from code review Co-authored-by: jack <jack@pngu.org> * `board_init` => `early_hardware_init_post`. --------- Co-authored-by: jack <jack@pngu.org>
30 lines
1.2 KiB
Markdown
30 lines
1.2 KiB
Markdown
# Kobold
|
|
|
|
|
|
|
|
4x4 macropad running QMK, in the same form factor as a bm16s. Non-standard Choc key spacing.
|
|
|
|
North-facing RGB, SPI NOR Flash, voltage and current measurement, direct pin matrix, reset to bootloader by holding top 4 keys.
|
|
|
|
* Keyboard Maintainer: [tzarc](https://github.com/tzarc)
|
|
* Hardware Supported: Kobold, r1
|
|
* Hardware Availability: [KiCad files](https://github.com/tzarc/keyboards/tree/main/Kobold)
|
|
|
|
Make example for this keyboard (after setting up your build environment):
|
|
|
|
make tzarc/kobold/r1:default
|
|
|
|
Flashing example for this keyboard:
|
|
|
|
make tzarc/kobold/r1:default:flash
|
|
|
|
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
|
|
|
## Bootloader
|
|
|
|
Enter the bootloader in 3 ways:
|
|
|
|
* **Bootmagic reset**: Hold down the top left key and plug in the keyboard
|
|
* **Physical reset button**: Simultaneously press the top four keys, or press the physical button on the back marked 'D'.
|
|
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
|