gitbot/qmk_firmware
0
0
Fork 0
mirror of https://github.com/qmk/qmk_firmware.git synced 2025-07-23 16:12:07 +00:00
Code Issues Packages Projects Releases Wiki Activity
deprecate_default_folder
qmk_firmware/keyboards/tzarc/kobold
History
Nick Brassel e83b709169
[Keyboard] Kobold r1 (#25161) 
* Kobold r1

* Apply suggestions from code review

Co-authored-by: jack <jack@pngu.org>

* `board_init` => `early_hardware_init_post`.

---------

Co-authored-by: jack <jack@pngu.org>
2025-04-16 20:41:20 -06:00
..
keymaps/default
r1
config.h [Keyboard] Kobold r1 (#25161) 2025-04-16 20:41:20 -06:00
halconf.h [Keyboard] Kobold r1 (#25161) 2025-04-16 20:41:20 -06:00
info.json
kobold.c [Keyboard] Kobold r1 (#25161) 2025-04-16 20:41:20 -06:00
mcuconf.h
readme.md

readme.md

Kobold

Kobold

4x4 macropad running QMK, in the same form factor as a bm16s. Non-standard Choc key spacing.

North-facing RGB, SPI NOR Flash, voltage and current measurement, direct pin matrix, reset to bootloader by holding top 4 keys.

  • Keyboard Maintainer: tzarc
  • Hardware Supported: Kobold, r1
  • Hardware Availability: KiCad files

Make example for this keyboard (after setting up your build environment):

make tzarc/kobold/r1:default

Flashing example for this keyboard:

make tzarc/kobold/r1:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in 3 ways:

  • Bootmagic reset: Hold down the top left key and plug in the keyboard
  • Physical reset button: Simultaneously press the top four keys, or press the physical button on the back marked 'D'.
  • Keycode in layout: Press the key mapped to QK_BOOT if it is available