mirror of
https://github.com/qmk/qmk_firmware.git
synced 2024-12-05 17:30:56 +00:00
1.9 KiB
1.9 KiB
Splitography
A pay what you will compact keyboard intended for use with Plover, free and open source stenography software. This is a low-cost keyboard with minimal packaging and design, and arrives fully assembled, ready to use.
- Keyboard Maintainer: The QMK Community
- Hardware Supported: Splitography
- Hardware Availability: softhruf.love
Make example for this keyboard (after setting up your build environment):
make splitography:default
Flashing example for this keyboard:
make splitography:default:flash
See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.
Bootloader
Enter the bootloader in 3 ways:
- Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard.
- Physical reset button: Briefly press the button on the back of the PCB.
- Keycode in layout: Press the key mapped to
QK_BOOT
if it is available.
Guide
Splitography quick start video
A short video guide on how to set up the SOFT/HRUF Splitography, a mechanical keyboard intended for use with Plover.
Here is a reference card for the standard keyboard layout:
- While holding down a colored thumb key, the matching colored functions/characters on the remaining keys can be pressed.
- Bottom edge keys are accessed by holding down both keys.
- Numlock locks in the Numpad layer.
- Alt and Shift pressed simultaneously to return to the standard layout.