mirror of
https://github.com/qmk/qmk_firmware.git
synced 2024-12-12 04:40:58 +00:00
43 lines
2.0 KiB
Markdown
43 lines
2.0 KiB
Markdown
# mini36
|
|
|
|
|
|
|
|
|
|
*A pre-built, low profile, split mechanical keyboard with 36 keys based on the RP2040 processor*
|
|
|
|
* Keyboard Maintainer: [Kevin Gee](https://github.com/controller-works)
|
|
* Hardware Supported: *mini36 split ergonomic keyboard*
|
|
* Hardware Availability: *https://controller.works/products/mini36-low-profile-ergonomic-keyboard* Hardware is available as pre-built units only.
|
|
|
|
Make example for this keyboard (after setting up your build environment):
|
|
|
|
```sh
|
|
make controllerworks/mini36:default
|
|
```
|
|
|
|
Flashing example for this keyboard:
|
|
|
|
```sh
|
|
make controllerworks/mini36:default:flash
|
|
```
|
|
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
|
|
|
## Features
|
|
- Highly integrated design with microcontroller, USB and TRRS connectors, and OLED all integrated on the main board with no secondary modules
|
|
- RP2040 processor by Raspberry Pi Foundation running at 130 MHz with 16MB flash memory
|
|
- CNC milled aluminum case with only 8mm thickness
|
|
- "PCB art" shine through back plate with gold surface finish
|
|
- 128x32 OLED on each keyboard half
|
|
- 36 per-key RGB LEDs and 12 backlight RGB LEDS are individually addressable
|
|
- ESD and over-current protection on USB and TRRS connectors
|
|
- Reset and boot tactile switches
|
|
- USB C host connection
|
|
- Hot swap connectors for Kailh Chocolate PG1350 switches
|
|
- Chocolate key spacing (18mm horizontal x 17mm vertical)
|
|
## Bootloader
|
|
|
|
Enter the bootloader in 3 ways:
|
|
|
|
* **Bootmagic reset**: Hold down the upper left key on the left hand keyboard half or the upper right key on the right hand keyboard half while plugging in USB
|
|
* **Physical reset button**: Press the RST button twice, rapidly
|
|
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available |