mirror of
https://github.com/qmk/qmk_firmware.git
synced 2024-11-22 11:29:26 +00:00
57 lines
2.1 KiB
Markdown
57 lines
2.1 KiB
Markdown
# xdboards/recon
|
|
|
|
|
|
|
|
A split low profile keyboard with hotswap sockets that is built around the Sea-Picro microcontroller for it's dedicated RGB pin.
|
|
|
|
* Keyboard Maintainer: [Daniel Weeks](https://github.com/Xanimos)
|
|
* Hardware Supported: Recon PCB, Sea-Picro, backwards compatibility with ProMicro pin layout.
|
|
* Hardware Availability: [xdboards.xyz shop](https://www.xdboards.xyz)
|
|
|
|
Make example for this keyboard (after setting up your build environment):
|
|
|
|
make xdboards/recon:default
|
|
|
|
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
|
|
|
## Bootloader
|
|
|
|
Enter the bootloader in 2 ways:
|
|
|
|
* **Physical reset button**: Briefly press the button on the side of the PCB
|
|
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
|
|
* **Boot Magic**: Hold down the boot magic key while plugging in the USB cable
|
|
|
|
## Setup for Sea-Picro microcontrollers
|
|
|
|
To take advantage of the dedicated 5v RGB pin on the sea-picro you must create your keymap
|
|
and then add a `rules.mk` file and copy and paste the following:
|
|
```
|
|
CONVERT_TO = rp2040_ce
|
|
USE_SEA_PICRO_RGB_PIN = yes
|
|
```
|
|
|
|
If you do not want to use the dedicated 5v RGB header then follow the Setup for non Sea-Picro microcontrollers.
|
|
|
|
## Setup for non Sea-Picro microcontrollers
|
|
|
|
Solder the "Pro-Micro Compatibility" jumper on the bottom of both boards.
|
|
|
|
In your keymap directory:
|
|
- add/modify a `rules.mk` file
|
|
- Remove or set `CONVERT_TO` to desired converter see [QMK Documentation](https://docs.qmk.fm/#/feature_converters)
|
|
- Remove or set `USE_SEA_PICRO_RGB_PIN` to `no`
|
|
|
|
|
|
## Setup for Underglow rgb only
|
|
|
|
|
|
Solder the "Per-Key RGB Skip" jumper on the bottom of both boards. Do not install per key RGBs.
|
|
|
|
In your keymap directory:
|
|
- add/modify a `config.h` file and insert
|
|
```
|
|
#define RGB_MATRIX_SPLIT { 5, 5 }
|
|
#define RGB_MATRIX_LED_COUNT 10
|
|
```
|
|
|