mirror of
https://github.com/qmk/qmk_firmware.git
synced 2024-11-26 21:26:46 +00:00
29 lines
1.3 KiB
Markdown
29 lines
1.3 KiB
Markdown
# Petrichor PCB
|
|
|
|
Petrichor PCB from CannonKeys for the AKB Petrichor keyboard
|
|
(This firmware is used for both the hotswap and solderable variant)
|
|
|
|
* Keyboard Maintainer: [Andrew Kannan](https://github.com/awkannan)
|
|
* Hardware Supported: RP2040
|
|
* Hardware Availability: [CannonKeys](https://cannonkeys.com)
|
|
|
|
|
|
Make example for this keyboard (after setting up your build environment):
|
|
|
|
make cannonkeys/petrichor:default
|
|
|
|
Flashing example for this keyboard:
|
|
|
|
make cannonkeys/petrichor:default:flash
|
|
|
|
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
|
|
|
## Bootloader
|
|
|
|
Enter the bootloader in 4 ways:
|
|
|
|
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
|
|
* **Physical reset button**: Hold the "BOOTSEL" button on the back of the PCB and briefly press the "REBOOT" button on the back of the PCB.
|
|
* **Top side reboot pads**: Bridge the reboot pads on the top of the PCB with a pair of tweezers twice in a row, quickly.
|
|
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
|