mirror of
https://github.com/qmk/qmk_firmware.git
synced 2024-11-26 13:16:44 +00:00
23 lines
1.6 KiB
Markdown
23 lines
1.6 KiB
Markdown
# m122-3270
|
|
|
|
|
|
|
|
This is a replacement controller for the IBM Model M 122 key terminal keyboard running on a STM32F411 BlackPill, intended to act as closely to the 3270 keyboard's functioning as possible while still being usable on a PC.
|
|
|
|
* Keyboard Maintainer: [Jay Maynard](https://github.com/jmaynard)
|
|
* Hardware Supported: BlackPill STM32F411, Teensy++ 2.0
|
|
* Hardware Availability: [BlackPill](https://www.adafruit.com/product/4877), [Teensy](https://www.pjrc.com/store/teensypp.html)
|
|
|
|
Make example for this keyboard (after setting up your build environment):
|
|
|
|
make tronguylabs/m122_3270/blackpill:default
|
|
make tronguylabs/m122_3270/teensy:default
|
|
|
|
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
|
|
|
A schematic and Gerber files are publicly available for those wishing to have carrier boards made
|
|
professionally instead of handwiring things. The M122 matrix connectors plug right into it. It can
|
|
be found at https://github.com/jmaynard/tronguylabs-m122-blackpill.
|
|
|
|
This is derived from Luke Stanley's handwired/ibm122m keyboard, with my own keymapping and rework of the I/O for the BlackPill. There's also a version for the Teensy++ 2.0, since that was my original design and I still use one on one board, even though I switched to the BlackPill for future-proofing. The Teensy++ 2.0 is not recommended for new designs.
|