mirror of
https://github.com/qmk/qmk_firmware.git
synced 2024-11-30 23:15:51 +00:00
f4a608255a
Co-authored-by: Joel Challis <git@zvecr.com> Co-authored-by: Drashna Jaelre <drashna@live.com> Co-authored-by: jack <0x6a73@protonmail.com>
29 lines
1.2 KiB
Markdown
29 lines
1.2 KiB
Markdown
# zed65
|
|
|
|
|
|
|
|
A 65% PCB with centered USB and JST-SH support, using APM32F103.
|
|
|
|
* Keyboard Maintainer: [Mechlovin](https://github.com/mechlovin)
|
|
* Hardware Supported: Ori, No2//65, Iron165...
|
|
* Hardware Availability: [Mechlovin' Studio](https://mechlovin.studio/)
|
|
|
|
Make example for this keyboard (after setting up your build environment):
|
|
|
|
make mechlovin/zed65/rev1
|
|
|
|
Flashing example for this keyboard:
|
|
|
|
make mechlovin/zed65/rev1:flash
|
|
|
|
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
|
|
|
## Bootloader
|
|
|
|
Enter the bootloader in 4 ways:
|
|
|
|
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
|
|
* **Bootloader reset**: Hold down the key at (0,13) in the matrix (usually the Back Space) and plug in the keyboard
|
|
* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
|
|
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
|