mirror of
https://github.com/qmk/qmk_firmware.git
synced 2024-12-15 14:13:27 +00:00
e03d72d71e
* Initial commit of Geekboards Macropad V2 keyboard * Apply suggestions from code review Co-authored-by: Joel Challis <git@zvecr.com> * Apply suggestions from code review: delete unnecessary files * Fixed typos * Apply suggestions from code review Co-authored-by: Ryan <fauxpark@gmail.com> * Change RGB_MATRIX config syntax following recent core changes * Apply suggestions from drashna code review * Remove unnecessary file (it is now defined in the core) * Remove unnecessary code, due to PR 11084 approve Co-authored-by: Joel Challis <git@zvecr.com> Co-authored-by: Ryan <fauxpark@gmail.com>
33 lines
1.1 KiB
Markdown
33 lines
1.1 KiB
Markdown
# geekboards/macropad_v2
|
|
|
|
![Geekboards Macropad v2](https://github.com/ruddy17/my_files/blob/main/macropad_v2.jpg)
|
|
|
|
8-keys macropad with CNC aluminium case, RGB LEDs for both backlight and switches, hot-swap connectors.
|
|
|
|
Keyboard Maintainer: [ruddy17](https://github.com/ruddy17)
|
|
Hardware Supported: Geekboards Macropad v2, STM32F072C8T6
|
|
Hardware Availability: https://geekboards.ru
|
|
|
|
Compile instruction for this keyboard (after setting up your build environment):
|
|
|
|
make geekboards/macropad_v2:via
|
|
|
|
## Update firmware
|
|
### Enter bootloader
|
|
1. Press and hold leftmost button on top row (where ESC usually is)
|
|
2. Plug in USB
|
|
3. Keep holding the button for 3 more seconds
|
|
4. Release the button
|
|
|
|
Alternatively:
|
|
1. Remove bottom cover
|
|
1. On the pcb short together two contacts labeled BOOT0
|
|
2. Plug in USB
|
|
3. Release BOOT0
|
|
|
|
### Flash
|
|
|
|
make geekboards/macropad_v2:via:flash
|
|
|
|
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|