qmk_firmware/keyboards/rgbkb/sol3
2023-04-03 18:33:45 +10:00
..
keymaps Update use of legacy keycodes (#19120) 2022-11-22 22:07:47 +11:00
rev1 [Core] Refactor keyevent_t for 1ms timing resolution (#15847) 2023-04-03 18:33:45 +10:00
config.h Move matrix config to info.json, part 3 (#19991) 2023-03-11 00:34:34 +11:00
halconf.h [Keyboard] Sol 3 Keyboard from RGBKB (#15687) 2022-01-21 19:51:12 -08:00
mcuconf.h [Keyboard] Sol 3 Keyboard from RGBKB (#15687) 2022-01-21 19:51:12 -08:00
readme.md RESET -> QK_BOOT keyboard readme (#18110) 2022-08-20 11:34:17 +01:00
rules.mk Move WS2812_DRIVER to data driven (#20248) 2023-03-26 18:22:12 +11:00
sol3.c [Keyboard] Sol 3 Keyboard from RGBKB (#15687) 2022-01-21 19:51:12 -08:00
sol3.h [Keyboard] Sol 3 Keyboard from RGBKB (#15687) 2022-01-21 19:51:12 -08:00

Sol 3

Sol 3

An extensible split keyboard with hotswap sockets and per-key RGB lighting.

  • Keyboard Maintainer: XScorpion2, RGBKB
  • Hardware Supported: RGBKB Sol 3 rev1 (STM32F303)
  • Hardware Availability: RGBKB.net

Make example for this keyboard (after setting up your build environment):

make rgbkb/sol3/rev1:default

Flashing example for this keyboard:

make rgbkb/sol3/rev1:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

To reset the board into bootloader mode, do one of the following:

  • Keycode in layout: Press the key mapped to QK_BOOT if it is available (Adjust + R by default)
  • Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard (also erases persistent settings)