mirror of
https://github.com/qmk/qmk_firmware.git
synced 2024-12-28 04:19:56 +00:00
6edcbdca19
* [Keyboard] YMDK YM68 Converted from a KBFirmware JSON file provided via the vendor's product listing. PCB supports Backlight on B6 and RGB Underglow on E2, but the LEDs are not pre-soldered according to the PCB photos. * update VENDOR_ID and PRODUCT_ID
25 lines
1.3 KiB
Markdown
25 lines
1.3 KiB
Markdown
# YM68
|
|
|
|
|
|
|
|
A 65% keyboard kit with support for in-switch LEDs and RGB Underglow.
|
|
|
|
* Keyboard Maintainer: [The QMK Community](https://github.com/qmk)
|
|
* Hardware Supported: YMDK YM68 PCB (ATmega32U4)
|
|
* Hardware Availability: [AliExpress](https://www.aliexpress.com/i/32999629504.html), [ymdkey.com](https://ymdkey.com/collections/68-71-keyboard-diy/products/ymdk-fully-programmable-68-cnc-aluminum-case-plate-pcb-stabilizers-mechanical-keyboard-diy-kit?variant=30994625232957)
|
|
|
|
Make example for this keyboard (after setting up your build environment):
|
|
|
|
make ymdk/ym68:default
|
|
|
|
Flashing example for this keyboard:
|
|
|
|
make ymdk/ym68:default:flash
|
|
|
|
To reset the board into bootloader mode, do one of the following:
|
|
|
|
* Tap the Reset switch mounted on the bottom side of the PCB
|
|
* Hold the key at the top left of the keyboard while connecting the USB cable (also erases persistent settings)
|
|
|
|
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|