mirror of
https://github.com/qmk/qmk_firmware.git
synced 2024-12-28 04:19:56 +00:00
189 lines
6.3 KiB
Markdown
189 lines
6.3 KiB
Markdown
# Dactyl Manuform (4x5, 5x6, 5x7, 6x6, 6x7)
|
|
|
|
the [Dactyl-Manuform](https://github.com/tshort/dactyl-keyboard) is a split curved keyboard based on the design of [adereth dactyl](https://github.com/adereth/dactyl-keyboard) and thumb cluster design of the [manuform](https://geekhack.org/index.php?topic=46015.0) keyboard, the hardware is similar to the let's split keyboard. all information needed for making one is in the first link.
|
|
|
|
|
|
## First Time Setup
|
|
|
|
Download or clone the `qmk_firmware` repo and navigate to its top level directory. Once your build environment is setup, you'll be able to generate the default .hex using:
|
|
|
|
Depending on your Layout chose one of the follwing commands:
|
|
|
|
```
|
|
$ make handwired/dactyl_manuform/YOUR_LAYOUT:YOUR_KEYMAP_NAME
|
|
```
|
|
|
|
example:
|
|
|
|
```
|
|
$ make handwired/dactyl_manuform/4x5:default
|
|
```
|
|
|
|
If everything worked correctly you will see a file:
|
|
|
|
```
|
|
dactyl_manuform_YOUR_LAYOUT_YOUR_KEYMAP_NAME.hex
|
|
```
|
|
|
|
For more information on customizing keymaps, take a look at the primary documentation for [Customizing Your Keymap](/docs/faq_keymap.md) in the main readme.md.
|
|
|
|
## Keymaps
|
|
|
|
### [Keymaps 4x5](/keyboards/handwired/dactyl_manuform/4x5/keymaps/)
|
|
|
|
#### Default
|
|
|
|
Simple QWERTY layout with 3 Layers.
|
|
|
|
#### Dvorak
|
|
|
|
### [Keymaps 5x6](/keyboards/handwired/dactyl_manuform/5x6/keymaps/)
|
|
|
|
#### Default
|
|
|
|
Just a copy of the Impstyle keymap. Feel free to adjust it.
|
|
|
|
#### Impstyle
|
|
|
|
A simple QWERTY keymap with 3 Layers. Both sides are connected via serial and the Left ist the master.
|
|
|
|
### [Keymaps 5x6_5](/keyboards/handwired/dactyl_manuform/5x6_5/keymaps/)
|
|
|
|
Similar layout to 5x6 but with only 5 thumb keys per side instead of 6.
|
|
|
|
#### Default
|
|
QWERTY layout with 7 Layers.
|
|
|
|
#### Via
|
|
Similar to Default but adds support for the [Via](https://www.caniusevia.com/) keymap configurator. Reduces the number of layers to 4 to comply with Via defaults, and remaps
|
|
some keys to accomodate that constraint.
|
|
|
|
### [Keymaps 5x7 aka almost Ergodox](/keyboards/handwired/dactyl_manuform/5x7/keymaps/)
|
|
|
|
#### Default
|
|
|
|
Keymap of Loligagger from geekhack.
|
|
|
|
### [Keymaps 6x6](/keyboards/handwired/dactyl_manuform/6x6/keymaps/)
|
|
|
|
#### Default
|
|
|
|
Simple QWERTY layout with 3 Layers.
|
|
|
|
### [Keymaps 6x7](/keyboards/handwired/dactyl_manuform/6x7/keymaps/)
|
|
|
|
#### Default
|
|
|
|
Simple QWERTY layout with 3 Layers.
|
|
|
|
### [Keymaps 3x5_3](/keyboards/handwired/dactyl_manuform/3x5_3/keymaps/)
|
|
|
|
#### Dlford
|
|
|
|
QWERTY/Colemak layout with per key RGB and other features
|
|
|
|
## Required Hardware
|
|
|
|
Apart from diodes and key switches for the keyboard matrix in each half, you
|
|
will need:
|
|
|
|
- 2 Arduino Pro Micros. You can find these on AliExpress for ≈3.50USD each.
|
|
- 2 TRRS sockets and 1 TRRS cable, or 2 TRS sockets and 1 TRS cable
|
|
|
|
Alternatively, you can use any sort of cable and socket that has at least 3
|
|
wires. If you want to use I2C to communicate between halves, you will need a
|
|
cable with at least 4 wires and 2x 4.7kΩ pull-up resistors
|
|
|
|
## Optional Hardware
|
|
|
|
A speaker can be hooked-up to either side to the `5` (`C6`) pin and `GND`, and turned on via `AUDIO_ENABLE`.
|
|
|
|
## Wiring
|
|
|
|
The 3 wires of the TRS/TRRS cable need to connect GND, VCC, and digital pin 3 (i.e.
|
|
PD0 on the ATmega32u4) between the two Pro Micros.
|
|
|
|
Next, wire your key matrix to any of the remaining 17 IO pins of the pro micro
|
|
and modify the `matrix.c` accordingly.
|
|
|
|
The wiring for serial:
|
|
|
|
|
|
|
|
The wiring for i2c:
|
|
|
|
|
|
|
|
The pull-up resistors may be placed on either half. It is also possible
|
|
to use 4 resistors and have the pull-ups in both halves, but this is
|
|
unnecessary in simple use cases.
|
|
|
|
You can change your configuration between serial and i2c by modifying your `config.h` file.
|
|
|
|
## Notes on Software Configuration
|
|
|
|
the keymaps in here are for the 4x5 layout of the keyboard only.
|
|
|
|
## Flashing
|
|
|
|
To flash your firmware take a look at: [Flashing Instructions and Bootloader Information](https://docs.qmk.fm/#/flashing)
|
|
|
|
## Choosing which board to plug the USB cable into (choosing Master)
|
|
|
|
Because the two boards are identical, the firmware has logic to differentiate the left and right board.
|
|
|
|
It uses two strategies to figure things out: looking at the EEPROM (memory on the chip) or looking if the current board has the usb cable.
|
|
|
|
The EEPROM approach requires additional setup (flashing the eeprom) but allows you to swap the usb cable to either side.
|
|
|
|
The USB cable approach is easier to setup and if you just want the usb cable on the left board, you do not need to do anything extra.
|
|
|
|
### Setting the left hand as master
|
|
|
|
If you always plug the usb cable into the left board, nothing extra is needed as this is the default. Comment out `EE_HANDS` and comment out `I2C_MASTER_RIGHT` or `MASTER_RIGHT` if for some reason it was set.
|
|
|
|
### Setting the right hand as master
|
|
|
|
If you always plug the usb cable into the right board, add an extra flag to your `config.h`
|
|
|
|
```
|
|
#define MASTER_RIGHT
|
|
```
|
|
|
|
### Setting EE_hands to use either hands as master
|
|
|
|
If you define `EE_HANDS` in your `config.h`, you will need to set the
|
|
EEPROM for the left and right halves.
|
|
|
|
The EEPROM is used to store whether the
|
|
half is left handed or right handed. This makes it so that the same firmware
|
|
file will run on both hands instead of having to flash left and right handed
|
|
versions of the firmware to each half. To flash the EEPROM file for the left
|
|
half run:
|
|
|
|
```
|
|
make handwired/dactyl_promicro:default:dfu-split-left
|
|
make handwired/dactyl_promicro:default:dfu-split-right
|
|
```
|
|
|
|
After you have flashed the EEPROM, you then need to set `EE_HANDS` in your config.h, rebuild the hex files and reflash.
|
|
|
|
Note that you need to program both halves, but you have the option of using
|
|
different keymaps for each half. You could program the left half with a QWERTY
|
|
layout and the right half with a Colemak layout using bootmagic's default layout option.
|
|
Then if you connect the left half to a computer by USB the keyboard will use QWERTY and Colemak when the
|
|
right half is connected.
|
|
|
|
## Notes on Using Pro Micro 3.3V
|
|
|
|
Do update the `F_CPU` parameter in `rules.mk` to `8000000` which reflects
|
|
the frequency on the 3.3V board.
|
|
|
|
Also, if the slave board is producing weird characters in certain columns,
|
|
update the following line in `matrix.c` to the following:
|
|
|
|
```
|
|
// wait_us(30); // without this wait read unstable value.
|
|
wait_us(300); // without this wait read unstable value.
|
|
```
|