gitbot/qmk_firmware

mirror of https://github.com/qmk/qmk_firmware.git synced 2024-12-27 11:59:54 +00:00

Jsully 4188d2272c

[Keyboard] Add Durgod Hades, Galaxy and Venus Keyboards (#12893 )

Co-authored-by: Drashna Jaelre <drashna@live.com>
Co-authored-by: Don Kjer <don.kjer@gmail.com>

2021-07-20 09:44:22 -07:00

2.0 KiB

Raw Blame History

DGK6X = Venus, Hades, Galaxy, etc.

This DGK6X code is shared between the ANSI variants of Venus, Hades and Galaxy keyboards.

Keyboard Maintainer: J-Sully and dkjer
Hardware Supported: Durgod Venus, Hades or Galaxy board with STM32F070RBT6
Hardware Availability: Venus, Hades and Galaxy

Instructions

Build

Instructions for building the Venus, Hades and Galaxy firmware can be found here:

Initial Flash

For first Flashing from initial Stock's Firmware

Back up original Firmware Image:

Unplug
Short Boot0 to Vdd (See below)
Plug In USB
Make a Flash Image's Backup in case you wanted to restore the Keyboard to Stock's Image:
- Using dfu-util:
```
dfu-util --list
dfu-util --alt 0 --dfuse-address 0x08000000 --upload ${OLD_STOCK_BIN}
```

Flash the QMK Firmware Image.

Put board into Bootloader mode, using the same method as when backing up the original Firmware (above)
Here are a few options for performing the initial Flash:
- Using QMK Toolbox
- Using dfu-util:
```
dfu-util --alt 0 --dfuse-address 0x08000000 --download ${NEW_QMK_BIN}
```

You can short Boot0 to Vdd by shorting R19 to C30 on the sides closest to the processor, as shown:

Hades & Venus:
Galaxy 75

Subsequent Flashing

For repeating Flashing you can use BootMagic:

BootMagic Lite has been enabled with Assigned "Esc" key
Unplug USB Cable
Holding Esc Button
Plug in USB Cable, Keyboard should be in ST-Bootloader state