mirror of
https://github.com/qmk/qmk_firmware.git
synced 2024-12-15 06:10:53 +00:00
d7f352de98
* adding revision A * Update keyboards/4pplet/eagle_viper_rep/rev_a/rev_a.c Co-authored-by: Drashna Jaelre <drashna@live.com> * Update keyboards/4pplet/eagle_viper_rep/rev_a/rev_a.c Co-authored-by: Drashna Jaelre <drashna@live.com> * Update keyboards/4pplet/eagle_viper_rep/rev_a/rev_a.c Co-authored-by: Drashna Jaelre <drashna@live.com> * Update keyboards/4pplet/eagle_viper_rep/rev_a/rev_a.h Co-authored-by: Drashna Jaelre <drashna@live.com> * Update keyboards/4pplet/eagle_viper_rep/rev_a/rev_a.c Co-authored-by: Drashna Jaelre <drashna@live.com> * Update readme.md Adding instruction on how to enter bootloader * adding instruction on how to enter bootloader (DFU) adding instruction on how to enter bootloader (DFU) * updated description * Update keyboards/4pplet/eagle_viper_rep/rev_a/halconf.h Co-authored-by: Nick Brassel <nick@tzarc.org> * Update keyboards/4pplet/eagle_viper_rep/rev_a/rev_a.c Co-authored-by: Nick Brassel <nick@tzarc.org> * Update keyboards/4pplet/eagle_viper_rep/rev_a/config.h Co-authored-by: Nick Brassel <nick@tzarc.org> * Update keyboards/4pplet/eagle_viper_rep/rev_a/chconf.h Co-authored-by: Nick Brassel <nick@tzarc.org> * Update keyboards/4pplet/eagle_viper_rep/rev_a/chconf.h Co-authored-by: Nick Brassel <nick@tzarc.org> * Update keyboards/4pplet/eagle_viper_rep/keymaps/default/keymap.c Co-authored-by: Nick Brassel <nick@tzarc.org> * Restoring palSetLineMode for working underglow I was experiencing the same issue as this: https://github.com/qmk/qmk_firmware/issues/12655#issuecomment-844104659 sigprof helped me resolve this issue. * Update rev_a.c removing palSetLineMode again, works great after rebase. Thanks! Co-authored-by: Drashna Jaelre <drashna@live.com> Co-authored-by: Nick Brassel <nick@tzarc.org>
1.2 KiB
1.2 KiB
Viper/Eagle REP Rev A
A alternative PCB for Viper and Eagle V2 and V3
- Keyboard Maintainer: 4pplet
- Hardware Supported: Viper/Eagle REP Rev A
Make example for this keyboard (after setting up your build environment):
make 4pplet/eagle_viper_rep/rev_a:default
See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.
How to enter bootloader (DFU):
- Press and hold the button on the keyboard (the small one on the same side as the MCU) for more than 1 second. The keyboard will then enter bootloader (DFU) mode and it's ready to flash the firmware.
- Note: If holding the button a shorter time, the keyboard will just reset. If you want to exit bootloader mode without flashing a firmware, dissconnect the keyboard from your PC and reconnect it.
Alternative option if the firmware is already pre-flashed:
- Unplug your keyboard, hold down the Spacebar and B at the same time, plug in your keyboard and wait a second before releasing the keys. Bootmagic lite is enabled by default.