mirror of
https://github.com/qmk/qmk_firmware.git
synced 2024-12-15 14:13:27 +00:00
f2a31b944d
Co-authored-by: Drashna Jaelre <drashna@live.com> Co-authored-by: Ryan <fauxpark@gmail.com> Co-authored-by: Karl Berggren <berggren.karl+git@gmail.com> Co-authored-by: spacefrogfeds <73514335+spacefrogfeds@users.noreply.github.com> Co-authored-by: Karl Berggren <karber@raysearchlabs.com>
32 lines
1.3 KiB
Markdown
32 lines
1.3 KiB
Markdown
# KBIC65
|
|
|
|
|
|
|
|
A 65%/70 key FR4-stack open-source keyboard with some design optimizations for wireless. For more info visit the [KBIC65 website](https://karlb.eu/kbic65/) or the [GitHub repo](https://github.com/b-karl/KBIC65).
|
|
|
|
* Keyboard Maintainer: [Karl Berggren](https://github.com/b-karl)
|
|
* Hardware Supported: [KBIC65](https://github.com/b-karl/KBIC65)
|
|
* Hardware Availability: Open-source design [available on GitHub](https://github.com/b-karl/KBIC65)
|
|
|
|
Firmware and default keymap have been tested using a KBIC65 with an Elite-C rev 4 controller.
|
|
|
|
## Build firmware
|
|
|
|
Make example for this keyboard (after setting up your build environment):
|
|
|
|
```bash
|
|
qmk compile -kb karlb/kbic65 -km default
|
|
```
|
|
|
|
See the [QMK setup documentation](https://docs.qmk.fm/#/newbs_getting_started) to set up the QMK tools. I recommend flashing using
|
|
|
|
```bash
|
|
qmk flash -kb karlb/kbic65 -km default
|
|
```
|
|
|
|
## Bootloader
|
|
|
|
Since the keyboard is designed to have an exposed ProMicro the bootloader can always be entered by short circuiting the `RST` and `GND` pins on the ProMicro. If the keyboard is configured with the default keymap, the bootloader can be entered by pressing `R_GUI/FN + B`
|
|
|
|
|