mirror of
https://github.com/qmk/qmk_firmware.git
synced 2024-12-05 01:15:19 +00:00
29 lines
1.3 KiB
Markdown
29 lines
1.3 KiB
Markdown
# BB Steno (BBS)
|
|
|
|
|
|
|
|
A bare-bones stenography keyboard. No bells or whistles. Simple, cheap, effective, steno.
|
|
|
|
* Keyboard Maintainer: [Kyle McCreery](https://github.com/kylemccreery)
|
|
* Hardware Supported: BBS v0.1, v1.1
|
|
* v0.1 PCBs were miswired for WS2812 RGB LED strips. As the data pin is the same, a strip could still be added with some handwiring.
|
|
* Hardware Availability: [BBS on MechWild](https://mechwild.com/product/bb-steno/)
|
|
|
|
Make example for this keyboard (after setting up your build environment):
|
|
|
|
make mechwild/bbs:default
|
|
|
|
Flashing example for this keyboard:
|
|
|
|
make mechwild/bbs:default:flash
|
|
|
|
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
|
|
|
## Bootloader
|
|
|
|
Enter the bootloader in 3 ways:
|
|
|
|
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (assigned to the top left key) and plug in the keyboard while holding it.
|
|
* **Physical reset button**: Press and hold the boot0 button on the blackpill, tap and release the nrst button on the blackpill, then release the boot0 button.
|
|
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available.
|