gitbot/qmk_firmware
0
0
Fork 0
mirror of https://github.com/qmk/qmk_firmware.git synced 2024-12-15 06:10:53 +00:00
Code Issues Packages Projects Releases Wiki Activity
b43031ae00
qmk_firmware/keyboards/handwired/dactyl_promicro/readme.md
Duncan Sutherland baf2891124
Update dactyl_promicro readme (#21144)
2023-07-08 00:13:53 +10:00

1.4 KiB
Raw Blame History

Dactyl (Pro Micro)

Dactyl

A split body, concave shaped key well, columnar keyboard with a 6 key thumb cluster that takes inspiration from the Kinesis Advantage keyboard range. This rendition of the Dactyl requires two micro controllers rather than the original implementation of a micro controller and I/O expander.

  • Keyboard Maintainer: Matt Adereth
  • Hardware Supported: Pro Micro controller, or clones of
  • Hardware Availability: GitHub

Make example for this keyboard (after setting up your build environment):

make handwired/dactyl_promicro:default

Flashing example for this keyboard:

make handwired/dactyl_promicro:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Optional Hardware

A speaker can be hooked-up to either side to the 5 (C6) pin and GND, and turned on via AUDIO_ENABLE.

Bootloader

Enter the bootloader in 2 ways:

  • Physical reset button: Briefly press the button on the back of the PCB - some may have pads you must short instead
  • Keycode in layout: Press the key mapped to QK_BOOT if it is available