mirror of
https://github.com/qmk/qmk_firmware.git
synced 2024-12-16 06:33:23 +00:00
72cf966a88
Co-authored-by: jack <0x6a73@protonmail.com> Co-authored-by: Less/Rikki <86894501+lesshonor@users.noreply.github.com> Co-authored-by: Ryan <fauxpark@gmail.com>
1.3 KiB
1.3 KiB
DT40
The PCB features:
- QMK & VIA compatibility
- RGB Matrix backlight
- Thin body & Simple keys
The following is the QMK Firmware for the Destop 40% keylayout - designed in Dongguan Jizhi Electronic Technology Co., Ltd
- Keyboard Maintainer: JZ-Skyloong
- Hardware Supported: DestopPCB for Skyloong keylayout 40%, STM32F103C8T6
- Hardware Availability: http://www.skyloong.com.cn
Make example for this keyboard (after setting up your build environment):
make skyloong/dt40:default
Flashing example for this keyboard:
make skyloong/dt40:default:flash
See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.
Bootloader
Enter the bootloader in 3 ways:
- Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
- Physical reset button: Briefly press the button on the back of the PCB - some may have pads you must short instead
- Keycode in layout: Press the key mapped to
QK_BOOT
if it is available