mirror of
https://github.com/qmk/qmk_firmware.git
synced 2024-12-16 14:43:24 +00:00
34 lines
2.4 KiB
Markdown
34 lines
2.4 KiB
Markdown
# The Key V2
|
||
|
||
|
||
|
||
The Stack Overflow "The Key V2" is a 3 button macropad based on atmega32u4 with hot-swappble Kailh Black Box switches.
|
||
|
||
> Last year, we brought Stack Overflow’s iconic April Fool’s joke to life. Advertised as the new (and only) way to copy and paste on the site, it was an ultra-compact macropad called The Key. The punchline-turned product was a huge hit, selling over 10K units and earning a nearly 5-star average review. Now, we’re back with a second act: The Key V2. The same size as its portable predecessor, this punchline-turned-product has a few notable changes—including an acrylic case to accent its two built-in RGB LEDs. Plus, we made it hot-swappable, so you can easily change out the switches for a truly custom experience. And just like the original, a portion of all proceeds from The Key V2 will go to the data-driven social startup digitalundivided.
|
||
|
||
* Keyboard Maintainer: [zvecr](https://github.com/zvecr)
|
||
* Hardware Supported: Drop **The Key V2**
|
||
* Hardware Availability: Limited Release - https://drop.com/buy/stack-overflow-the-key-v2-macropad
|
||
|
||
Make example for this keyboard (after setting up your build environment):
|
||
|
||
# default provided by Drop / Stack Overflow
|
||
make drop/thekey/v2:default
|
||
# common modification where C = CTRL+C, V = CTRL+V
|
||
make drop/thekey/v2:url-copy-paste
|
||
|
||
Flashing example for this keyboard:
|
||
|
||
make drop/thekey/v2:default:flash
|
||
|
||
|
||
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
||
|
||
## Bootloader
|
||
|
||
Enter the bootloader in 3 ways:
|
||
|
||
* **Bootmagic reset**: Hold down the "Stack Overflow" key, the "left-most" or furthest from the USB plug while inserting the USB cable for a few seconds. The LEDs will **NOT** turn on.
|
||
* **Physical reset button**: Briefly press and hold the reset button while pluggin in the USB port. The LEDs on the back will **NOT** turn on. Depending on your case revision, you may have to remove the 4 screws on the back plate to access the switch OR you can use the associated access hole on newer releases.
|
||
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
|