mirror of
https://github.com/qmk/qmk_firmware.git
synced 2024-12-05 01:15:19 +00:00
6cdf230a20
* Adding the custom handwired 5x5 macropad. * Update keyboards/handwired/m40/5x5_macropad/readme.md * Update keyboards/handwired/m40/5x5_macropad/rules.mk * Update keyboards/handwired/m40/5x5_macropad/readme.md * Update readme.md fixed the github link to my profile * Update keyboards/handwired/m40/5x5_macropad/5x5_macropad.c * Update keyboards/handwired/m40/5x5_macropad/5x5_macropad.h * Update keyboards/handwired/m40/5x5_macropad/5x5_macropad.h * Update keyboards/handwired/m40/5x5_macropad/config.h * Update keyboards/handwired/m40/5x5_macropad/readme.md * Update keyboards/handwired/m40/5x5_macropad/config.h * Update keyboards/handwired/m40/5x5_macropad/readme.md * Update keyboards/handwired/m40/5x5_macropad/keymaps/default/keymap.c * Apply suggestions from code review * added discord Id for maintainer contact * Update keyboards/handwired/m40/5x5_macropad/readme.md * Update keyboards/handwired/m40/5x5_macropad/info.json
1.4 KiB
1.4 KiB
5x5_macropad
This is very simple 5x5 macropad for general use. It does not come with any particular layout, it is assumed that layouts will be built on the qmk configurator site. Row and column pins start on the edge of Arduino, if smaller board is required, you can simply connect only first x row/column pairs to the board and get the size of the board you need.
- Keyboard Maintainer: Tomek (discord: m40#4792)
- Hardware Supported: 3D Printed, handwired, using Arduino Pro-Micro (Atmega32U4) for controller
- Hardware Availability: https://www.thingiverse.com/thing:5239739
Make example for this keyboard (after setting up your build environment):
make handwired/m40/5x5_macropad:default
Flashing example for this keyboard:
make handwired/m40/5x5_macropad:default:flash
See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.
Bootloader
Enter the bootloader in 2 ways:
- Physical reset button: Briefly press the button on the back of the PCB - some may have pads you must short instead
- Keycode in layout: Press the key mapped to
RESET
if it is available. In default layout (if you flashed it already once) it is the top-right button.