mirror of
https://github.com/qmk/qmk_firmware.git
synced 2024-11-25 12:46:41 +00:00
c0d7a43637
Co-authored-by: jack <0x6a73@protonmail.com> Co-authored-by: Drashna Jaelre <drashna@live.com>
27 lines
1.1 KiB
Markdown
27 lines
1.1 KiB
Markdown
# handwired/jankrp2040dactyl
|
|
|
|
|
|
A budget Dactyl-Manuform build using Raspberry Pi Pico.
|
|
|
|
* Keyboard Maintainer: [Ethan Perry](https://github.com/wheres-perry)
|
|
* Hardware Supported: RP2040 Community Edition
|
|
* Hardware Availability: https://www.digikey.com/en/product-highlight/r/raspberry-pi/raspberry-pi-picoboard
|
|
|
|
Make example for this keyboard (after setting up your build environment):
|
|
|
|
make handwired/jankrp2040dactyl:default
|
|
|
|
Flashing example for this keyboard:
|
|
|
|
make handwired/jankrp2040dactyl:default:flash
|
|
|
|
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
|
|
|
## Bootloader
|
|
|
|
Enter the bootloader in 3 ways:
|
|
|
|
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
|
|
* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
|
|
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
|