gitbot/qmk_firmware
0
0
Fork 0
mirror of https://github.com/qmk/qmk_firmware.git synced 2024-12-15 06:10:53 +00:00
Code Issues Packages Projects Releases Wiki Activity
a4465e8d86
qmk_firmware/keyboards/handwired/nortontechpad/readme.md

1.1 KiB
Raw Blame History

NortonTechPad

The NortonTechPad is a numpad inspired by the SiCK-Pad,it is also 3D printed and designed to be inexpensive.

  • Keyboard Maintainer: NortonTech
  • Hardware Supported: Pro Micro

Make example for this keyboard (after setting up your build environment):

make handwired/nortontechpad:default

Flashing example for this keyboard:

make handwired/nortontechpad:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in 3 ways:

  • Bootmagic reset: Hold down the top left key and plug in the keyboard. This will also clear EEPROM, so it is a good first step if the keyboard is misbehaving.
  • Physical reset button: Short the GND and RST pins on the Pro Micro with something conductive.
  • Keycode in layout: There is no key mapped to QK_BOOT in the pre-created keymaps, but you may assign this key in any keymaps you create.