mirror of
https://github.com/qmk/qmk_firmware.git
synced 2024-12-14 22:00:53 +00:00
39 lines
1.7 KiB
Markdown
39 lines
1.7 KiB
Markdown
# sweet16v2
|
|
|
|
A 4x4 macropad with RGB inswitch lighting and underglow.
|
|
|
|
* Keyboard Maintainer: [ziptyze](https://github.com/ziptyze)
|
|
* Hardware Supported: 1upkeyboards Sweet 16 v2
|
|
* Hardware Availability: [1upkeyboards](https://1upkeyboards.com/)
|
|
|
|
Make example for this keyboard using an atmel-based controller (after setting up your build environment):
|
|
|
|
make 1upkeyboards/sweet16v2/promicro:default
|
|
|
|
Flashing example for this keyboard using an atmel-based controller:
|
|
|
|
make 1upkeyboards/sweet16v2/promicro:default:flash
|
|
|
|
Make example for this keyboard using an rp2040-based controller (after setting up your build environment):
|
|
|
|
make 1upkeyboards/sweet16v2/kb2040:default
|
|
|
|
Flashing example for this keyboard using an rp2040-based controller:
|
|
|
|
make 1upkeyboards/sweet16v2/kb2040:default:flash
|
|
|
|
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
|
|
|
## Bootloader
|
|
|
|
Enter the bootloader in 3 ways for atmel-based controllers:
|
|
|
|
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
|
|
* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
|
|
* **Keycode in layout**: Press the key mapped to `RESET` if it is available
|
|
|
|
|
|
Enter the bootloader in 2 ways for rp2040-based controllers:
|
|
|
|
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
|
|
* **Bootsel button**: Hold the bootsel button on controller and plug in the keyboard |