mirror of
https://github.com/qmk/qmk_firmware.git
synced 2024-11-24 04:12:56 +00:00
46 lines
1.7 KiB
Markdown
46 lines
1.7 KiB
Markdown
# Splitty
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This is a split ergonomic keyboard initially based on the Ergodox layout
|
|
without the thumb cluster. It uses 32 keys per sides with Cherry MX
|
|
compatibles switches, thirty 1u and two vertical 1.5u caps.
|
|
|
|
The controller is integrated in order to make the keyboard as slim as possible.
|
|
|
|
It connects to the computer using a micro-B USB. Both sides are connected
|
|
together also using micro-B USB. Any connection mistake should not break
|
|
anything and the keyboard supports hot plugging.
|
|
|
|
* Keyboard Maintainer: [Nicolas Schodet](https://github.com/schodet)
|
|
* Hardware Supported: Splitty
|
|
* Hardware Availability: [Splitty](https://git.ni.fr.eu.org/splitty.git/about/)
|
|
|
|
Make example for this keyboard (after setting up your build environment):
|
|
|
|
make splitty:default
|
|
|
|
Flashing example for this keyboard:
|
|
|
|
make splitty:default:flash
|
|
|
|
Handedness should be programmed in EEPROM once, you can use these commands to
|
|
flash the firmware and the EEPROM:
|
|
|
|
make splitty:default:dfu-split-left
|
|
make splitty:default:dfu-split-right
|
|
|
|
If you do not have a reset keycode in your keymap, press the reset button or
|
|
short the corresponding contacts if not populated to enter bootloader.
|
|
|
|
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools)
|
|
and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide)
|
|
for more information. Brand new to QMK? Start with our
|
|
[Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|