mirror of
https://github.com/qmk/qmk_firmware.git
synced 2024-12-17 07:03:23 +00:00
a461f607e7
* Add Kudox Full keyboard * Add keyboards/kudox_full SPDX identifier * Modify rule.mk of keyboards/kudox_full * Remove html code from README of keyboards/kudox_full * Modify readme of keyboards/kudox_full * rev1.c includes rev1.h - kudox-full/rev1 * Move to <keyboard>.c oled_task_user and eeconfig_init_user * Move post_config.h MOUSEKEY_* * Change BOOTMAGIC_ENABLE no kudox_full * Modify the obsoleted codes * Modify eeconfig_init_kb from eeconfig_init_user * Set none as default, but values * Add about the bootloader on kudox_full/readme * Modify the comments in keyboards/kudox_full/rules.mk
33 lines
1.4 KiB
Markdown
33 lines
1.4 KiB
Markdown
# The Kudox Full keyboard
|
|
|
|
|
|
|
|
 | 
|
|
:----:|:-----:
|
|
front | angle
|
|
|
|
- Keyboard Maintainer: [Kumao Kobo](https://github.com/kumaokobo)
|
|
- Hardware Supported: Kudox Full PCB rev1.0 w/ Pro Micro
|
|
- Assembly guide: [Kudox Full/README](https://github.com/kumaokobo/kudox-keyboard/blob/master/kudox-full/README.md)
|
|
|
|
## Bootloader
|
|
|
|
Enter the bootloader in 3 ways:
|
|
|
|
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
|
|
* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
|
|
* **Keycode in layout**: Press the key mapped to `RESET` if it is available
|
|
|
|
## Building Firmware
|
|
|
|
Make example for this keyboard (after setting up your build environment):
|
|
|
|
make kudox_full/rev1:default
|
|
|
|
|
|
Flashing example for this keyboard:
|
|
|
|
make kudox_full/rev1:default:flash
|
|
|
|
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|