mirror of
https://github.com/qmk/qmk_firmware.git
synced 2024-11-29 22:45:51 +00:00
29 lines
1.0 KiB
Markdown
29 lines
1.0 KiB
Markdown
# Eliza
|
|
|
|
|
|
|
|
40% alice-style ergo keyboard with a seamless 3D printed gasket-mount case.
|
|
|
|
* Keyboard Maintainer: [kb-elmo](https://github.com/kb-elmo)
|
|
* Hardware Supported: Eliza rev.1 PCB
|
|
* Hardware Availability: [Open source project](https://github.com/kb-elmo/eliza)
|
|
|
|
Make example for this keyboard (after setting up your build environment):
|
|
|
|
make kb_elmo/eliza:default
|
|
|
|
Flashing example for this keyboard:
|
|
|
|
make kb_elmo/eliza:default:flash
|
|
|
|
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
|
|
|
|
|
## Bootloader
|
|
|
|
Enter the bootloader in 3 ways:
|
|
|
|
* **Bootmagic reset**: Hold down the top left key and plug in the keyboard
|
|
* **Physical reset**: Briefly short the two contacts labeled "RESET" on the back of the PCB
|
|
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
|