mirror of
https://github.com/qmk/qmk_firmware.git
synced 2024-12-05 01:15:19 +00:00
b973258123
* fix a bug in which the physical matrix did not match the physical layout. Top row was missing 1 key and bottom row had 1 extra key * amend keymap to account for the new physical matrix * 6.25u space bar is actually supported, so add a new layout that supports this * fix keymap readme to no longer need the cautionary warning
991 B
991 B
Additional info
Matrix
You probably tried or will try to configure the keymapping to your liking. To make it easier configuring your layouts, photo of keyboards matrix will help.
Pinout
Most of the pinout can be found in config.h but there's here's a table of all the used pins for TMO50 (including indicator LED pins)
Pin | Assigned to |
---|---|
D5 | Row 0 |
D3 | Row 1 |
D2 | Row 2 |
D0 | Row 3 |
D1 | Col 0 |
D4 | Col 1 |
F0 | Col 2 |
F1 | Col 3 |
F4 | Col 4 |
F5 | Col 5 |
F6 | Col 6 |
F7 | Col 7 |
D6 | Col 8 |
D7 | Col 9 |
B4 | Col 10 |
B5 | Col 11 |
B6 | Col 12 |
C6 | Col 13 |
B7 | Backlight |
C7 | RGB LEDs |
B0 | LED 4 (L4) |
B1 | LED 3 (L3) |
B2 | LED 2 (L2) |
B3 | LED 1 (L1) |
Indicator LEDs
Their size is 2×3×4mm. The THT hole without a circle on the pcb is VCC(+) and the other one is connect to their corresponding pin.