mirror of
https://github.com/qmk/qmk_firmware.git
synced 2024-11-29 22:45:51 +00:00
c5f1e9797a
* change missed kprepublic readmes * fix xiudi readmes * initial change, see pr description * change readmes * changes names in readmes and device descriptors
31 lines
1.4 KiB
Markdown
31 lines
1.4 KiB
Markdown
# BM80HSRGB
|
|
|
|
|
|
|
|
A tkl, hotswap, in switch RGB keyboard from KPRepublic.
|
|
|
|
* Keyboard Maintainer: [peepeetee](https://github.com/peepeetee)
|
|
* Hardware Supported: BM80HSRGB
|
|
* Hardware Availability: [KP Republic](https://kprepublic.com/collections/new-arrival/products/bm80rgb-bm80-rgb-80-hot-swappable-custom-mechanical-keyboard-pcb-programmed-qmk-via-firmware-full-rgb-switch-underglow-type-c)
|
|
|
|
Make example for this keyboard (after setting up your build environment):
|
|
|
|
make kprepublic/bm80hsrgb:default
|
|
|
|
Flashing example for this keyboard:
|
|
|
|
make kprepublic/bm80hsrgb:default:flash
|
|
|
|
To reset the board into bootloader mode, do one of the following:
|
|
|
|
* Short the two-pad footprint between the "delete" key and the "end" key while the board is plugged in
|
|
* Press the switch labled RST on the back of the PCB, near the MCU, while the board is plugged in
|
|
* Hold the Esc key while connecting the USB cable (also erases persistent settings)
|
|
|
|
All of the RGB matrix effects are enabled by default. To disable specific ones, see [this section](https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects) for more information.
|
|
|
|
|
|
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
|
|
|
|