lefishe

firmware for the 65xt keyboard designed around the symmetrical blocker 65% layout. This pcb cab also be used as a replacement pcb for the revoKmini/kmacmini with some modification to the design

Keyboard Maintainer: Lyso1
Hardware Supported: LeFishe, atmega32u4
Hardware Availability: /u/TheLysol_27

Make example for this keyboard (after setting up your build environment):

make lyso1/lefishe:default

Enter into the bootloader to flash new firmware in 3 ways:

* **Bootmagic reset**: Hold down the key at (0,0) in the matrix(The F1 key in this case) and plug the the keyboard in. 
* **Physical reset button**: Briefly press the button on the back and left side of the PCB(exactly under where the "2" key would be located) while the PCB is plugged in.
* **Keycode in layout**: Press the key mapped to `QK_BOOT` (RALT + E in this case) while the keyboard is plugged in.

Flashing example for this keyboard:

make lyso1/lefishe:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

1.3 KiB Raw Blame History

lefishe

1.3 KiB

Raw Blame History