0
0
mirror of https://github.com/qmk/qmk_firmware.git synced 2024-12-23 18:09:53 +00:00
qmk_firmware/keyboards/handwired/rs60/readme.md
Erovia ad86894ae7
Rename keyboard-level readmes to lower-case ()
This is the recommendation in the [PR
Checklist](https://docs.qmk.fm/#/pr_checklist?id=keyboard-prs) and it
will make working with them easier in the CLI/API/etc.
2020-10-25 15:23:42 +00:00

28 lines
1.5 KiB
Markdown

# rs60: Handwired Slim Preonic Clone
I wanted a preonic layout but with a very low profile. As Jack is still working on the Preonic PCB for Kailh Choc switches, I figured I could try to handwire one myself. It's my first custom keyboard, so I had a lot to learn.
First I designed the case in fusion 360. I wanted to build it using acrylic, constrained myself to standard acrylic sheet thickness.
![](https://imgur.com/NscS7Rd.jpg)
You can download the model [here](https://a360.co/2OqiKLm).
To test my design I 3D printed the parts.
![](https://imgur.com/MSF7zLS.jpg)
The result was encouraging, so I decided to build a prototype out of the printed plates using Kailh Choc brown switches. I tried to make the handwiring job as flat as possible so it can fit in my design.
![](https://i.imgur.com/67yZx0V.jpg)
![](https://i.imgur.com/ft72Cgj.jpg)
I designed switch plate and the middle plates so that they would be glued together. The middle plate has inserts to attach the bottom plate using m8 screws.
![](https://i.imgur.com/GstTohI.jpg)
The end result is not too bad, but there is a few things I would do differently. Gluing 3D printed plates wasn't a good idea. The switch layer is so thin, that it bends when all the switches are slotted. As a result, the keyboard is not entirely flat. I will replace the bottom plate by a metal one so I get more weight and rigidity.
Even with acrylic, I think I will have the same issue. I might switch to screws + bolts that go all the way through.