0
0
mirror of https://github.com/qmk/qmk_firmware.git synced 2024-12-24 18:39:53 +00:00
qmk_firmware/keyboards/handwired/lemonpad/readme.md
2022-08-20 11:34:17 +01:00

28 lines
1.3 KiB
Markdown

# lemonpad
![lemonpad](https://i.imgur.com/hAp2Nich.jpeg)
This is a QMK and VIA implementation for an atmega32u4 based adaptation of the Adafruit Lemon Keypad. By default it uses a Pro Micro, if you would like to use a different microcontroller please make sure you have the correct bootloader set.
* Keyboard Maintainer: [dari-studios](https://github.com/dari-studios)
* Hardware Supported: atmega32u4 based boards with the Caterina bootloader
* Hardware Availability: https://learn.adafruit.com/qtpy-lemon-mechanical-keypad-macropad
Make example for this keyboard (after setting up your build environment):
make handwired/lemonpad:default
Flashing example for this keyboard:
make handwired/lemonpad:default:flash
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
## Bootloader
Enter the bootloader in 3 ways:
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available