0
0
mirror of https://github.com/qmk/qmk_firmware.git synced 2024-12-21 09:03:23 +00:00
qmk_firmware/keyboards/dyz/dyz60_hs/readme.md
James Young 288808526b
dyz60_hs Layout Additions ()
* dyz60_hs: add matrix diagram

* add LAYOUT_60_ansi

* add LAYOUT_60_ansi_split_bs_rshift

* add LAYOUT_60_tsangan_hhkb

* add LAYOUT_60_iso

* add LAYOUT_60_iso_split_bs_rshift

* enable Community Layouts support

* readme.md: correct keyboard references

Replace `dyz60` with `dyz60_hs` as needed.
2022-09-03 22:43:52 +01:00

30 lines
952 B
Markdown

# dyz60_hs
![dyz60 pcb](https://i.imgur.com/l9z5KuJh.jpg)
60% layout has flexcut with multiple layout and mounting support.
* Keyboard Maintainer: [dayatz](https://github.com/dayatz)
* Hardware Supported: dyz60_hs, ATmega32U4
* Hardware Availability: Local Indonesia GB.
#### Enter Bootloader
Enter the bootloader in 3 ways:
* **Bootmagic reset**: Hold down the Esc key and plug in the keyboard
* **Physical reset pins**: Briefly short the reset pins on the bottom of Space key
#### Flashing
Make example for this keyboard (after setting up your build environment):
make dyz/dyz60_hs:default
Flashing example for this keyboard:
make dyz/dyz60_hs:default:flash
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).