mirror of
https://github.com/qmk/qmk_firmware.git
synced 2024-12-21 09:03:23 +00:00
bec8d58ad8
* Fixed compilation of the ps2avrGB keyboard/firmware This commit fixes the silent compilation error for the ps2avrGB keyboard/firmware. This error was caused by a lacking default keymap which it did not have because all keyboards based on it were moved to another directory. I also added the required config.h options so it's possible to compile it again and (probably) flash it on a b.mini. Lastly, I updated the README to reflect the current state. This commit fixes #2425 * Referenced the pearl in the ps2avrGB REAMDE Added a reference to the pearl keyboard in the README of the ps2avrGB keyboard as it is originally based on the firmware as well.
78 lines
2.8 KiB
Markdown
78 lines
2.8 KiB
Markdown
ps2avrGB keyboard firmware
|
|
==========================
|
|
|
|
This is a port of the QMK firmware for boards that are based on the
|
|
ps2avrGB firmware, like the [ps2avrGB
|
|
keyboard](https://www.keyclack.com/product/gb-ps2avrgb/) or the ones sold
|
|
by [Winkeyless](http://winkeyless.kr/product/ps2avrgb-parts/).
|
|
|
|
Note that this is a complete replacement for the firmware, so you won't be
|
|
using Bootmapper Client to change any keyboard settings, since not all the
|
|
USB report options are supported.
|
|
|
|
This is an example based on the b.mini keyboard for making other keyboards
|
|
compatible with QMK; fully supported boards have their own directory.
|
|
|
|
## Supported Boards
|
|
|
|
- [b.fake](https://github.com/qmk/qmk_firmware/tree/master/keyboards/bfake)
|
|
- [b.mini](https://github.com/qmk/qmk_firmware/tree/master/keyboards/bmini)
|
|
- [pearl](https://github.com/qmk/qmk_firmware/tree/master/keyboards/pearl)
|
|
|
|
## Installing
|
|
|
|
First, install the requirements. These commands are for OSX, but all you
|
|
need is the AVR toolchain and `bootloadHID` for flashing:
|
|
|
|
```
|
|
$ brew cask install crosspack-avr
|
|
$ brew install --HEAD https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb
|
|
```
|
|
|
|
In order to use the `./program` script, which can reboot the board into
|
|
the bootloader, you'll need Python 2 with PyUSB installed:
|
|
|
|
```
|
|
$ pip install pyusb
|
|
```
|
|
|
|
Then, with the keyboard plugged in, simply run this command from the
|
|
`qmk_firmware` directory:
|
|
|
|
```
|
|
$ make ps2avrGB:program
|
|
```
|
|
|
|
If you prefer, you can just build it and flash the firmware directly with
|
|
`bootloadHID` if you boot the board while holding down `L_Ctrl` to keep it
|
|
in the bootloader:
|
|
|
|
```
|
|
$ make ps2avrGB
|
|
$ bootloadHID -r ps2avrGB_default.hex
|
|
```
|
|
|
|
## Setting the board to bootloader mode
|
|
|
|
If you're lucky, the programming script does this automagically for you. If
|
|
however this doesn't work for you, you need to enter the bootloader mode manually
|
|
by plugging the keyboard in while holding the bootloader key. If you did this
|
|
correctly the LEDs will blink and you'll be able to flash your firmware.
|
|
|
|
The bootloader key is the top left key of your matrix. For a standard board
|
|
from winkeyless.kr this is `L_Ctrl`, but for some custom boards running ps2avrGB
|
|
this might be different. For the Pearl it's `Esc`, for a b.fake it is `q`. If
|
|
you're unsure you should be able to see the key in the bootmapper client.
|
|
|
|
|
|
## Troubleshooting
|
|
|
|
From my experience, it's really hard to brick these boards. But these
|
|
tricks have been useful when it got stuck in a weird scenario.
|
|
|
|
1. Try plugging the board in while holding the bootloader key. This will force
|
|
it to boot only the bootloader without loading the firmware. Once this is
|
|
done, just reflash the board with the original firmware.
|
|
2. Sometimes USB hubs can act weird, so try connecting the board directly
|
|
to your computer or plugging/unplugging the USB hub.
|