gitbot/qmk_firmware
0
0
Fork 0
mirror of https://github.com/qmk/qmk_firmware.git synced 2024-11-26 21:26:46 +00:00
Code Issues Packages Projects Releases Wiki Activity
5d6d6b3e8f
qmk_firmware/keyboards/sawnsprojects/okayu/readme.md
Sắn 62ff02a101
[Keyboard] Add Okayu (#22077) 
Co-authored-by: jack <0x6a73@protonmail.com>
Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com>
Co-authored-by: Drashna Jaelre <drashna@live.com>
2023-10-13 01:53:12 -06:00

1.2 KiB
Raw Blame History

Okayu

Okayu

A Wibu 60% keyboard PCB Design by inspire of Nekomata Okayu and can fit many keyboard case

  • Keyboard Maintainer: Mai The San
  • Hardware Supported: Several 60% keyboard (RE60, Krush60, Unikorn, Tinyneko, Bakeneko60...)
  • Hardware Availability: NuxrosKB, Salane Discord

Make example for this keyboard (after setting up your build environment):

make sawnsprojects/okayu:default

Flashing example for this keyboard:

make sawnsprojects/okayu:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in 3 ways:

  • Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  • Physical reset button: Briefly press the button on the back of the PCB - some may have pads you must short instead
  • Keycode in layout: Press the key mapped to QK_BOOT if it is available