mirror of
https://github.com/qmk/qmk_firmware.git
synced 2024-12-22 01:23:23 +00:00
6d7745a110
* Converter: add XT USB converter from TMK * Converter: port TMK code for USB converter to QMK * Apply requested changes after code review by @drashna - use "pragma once" instead of include guards - use LAYOUT instead of KEYMAP - allow customisation with matrix_init_user() and matrix_scan_user() - set BOOTLOADER instead of BOOTLOADER_SIZE - Add XT_ENABLE to OPT_DEFS * Remove unnecessary lines
18 lines
665 B
Markdown
18 lines
665 B
Markdown
XT to USB keyboard converter
|
|
==============================
|
|
This is a port of TMK's converter/xt_usb to QMK.
|
|
|
|
This firmware converts XT keyboard protocol to USB.(It supports Scan Code Set 1.)
|
|
|
|
|
|
Connect Wires
|
|
-------------
|
|
1. Connect **Vcc** and **GND**.
|
|
2. Connect **Clock** and **Data** line. **Clock** is on `PD1`, **Data** on `PD0` by default. And optionally you can use `PB7` for **Reset**.(Compatible to Soarer's converter) To change pin configuration edit `config.h`.
|
|
3. You need pull-up resistor. **1K-10K Ohm** will be OK.
|
|
|
|
|
|
XT keyboard protocol resource
|
|
------------------------------
|
|
https://github.com/tmk/tmk_keyboard/wiki/IBM-PC-XT-Keyboard-Protocol
|