mirror of
https://github.com/qmk/qmk_firmware.git
synced 2024-12-05 17:30:56 +00:00
86 lines
4.2 KiB
Markdown
86 lines
4.2 KiB
Markdown
# QMK Firmware XAP Specs
|
|
|
|
This document describes the requirements of the QMK XAP ("extensible application protocol") API.
|
|
|
|
## Types
|
|
|
|
**All integral types are little-endian.**
|
|
|
|
| Name | Definition |
|
|
| -- | -- |
|
|
| _type[n]_ | An array of `type`, with array extent of `N` -- e.g. `u8[2]` signifies two consecutive octets. |
|
|
| _u16_ | An unsigned 16-bit integral, commonly seen as `uint16_t` from _stdint.h_. |
|
|
| _u32_ | An unsigned 32-bit integral, commonly seen as `uint32_t` from _stdint.h_. |
|
|
| _u8_ | An unsigned 8-bit integral (octet, or byte), commonly seen as `uint8_t` from _stdint.h_. |
|
|
|
|
## Definitions
|
|
|
|
This list defines the terms used across the entire set of XAP protocol documentation.
|
|
|
|
| Name | Definition |
|
|
| -- | -- |
|
|
| _Handler_ | A piece of code that is executed when a specific _route_ is received. |
|
|
| _Payload_ | Any received data appended to the _route_, which gets delivered to the _handler_ when received. |
|
|
| _Response_ | The data sent back to the host during execution of a _handler_. |
|
|
| _Route_ | A sequence of _IDs_ describing the route to invoke a _handler_. |
|
|
| _Subsystem_ | A high-level area of functionality within XAP. |
|
|
| _ID_ | A single octet / 8-bit byte, representing Subsystem or Route index. |
|
|
| _Request Header_ | Packet format for inbound data. Takes the format:<br>`token` - token<br>`u8` - length |
|
|
| _Response Flags_ | An `u8` containing the status of the request. |
|
|
| _Response Header_ | Packet format for outbound data. Takes the format:<br>`token` - token<br>`response_flags` - flags<br>`u8` - length |
|
|
| _Token_ | A `u16` associated with a specific request as well as its corresponding response. Valid token values are within the range `0x0100`-`0xFFFF`. |
|
|
|
|
## Requests and Responses
|
|
|
|
Communication generally follows a request/response pattern.
|
|
|
|
Each request needs to include a _token_ -- this `u16` value prefixes each outbound request from the host application and its corresponding response.
|
|
This allows response messages to be correlated with their request, even if multiple host applications are communicating with the firmware simultaneously.
|
|
Host applications should randomly generate a token ID for **every** outbound request, unless using a reserved token defined below.
|
|
To ensure host interoperability, valid token values are within the range `0x0100`-`0xFFFF`.
|
|
|
|
This token is followed by a `u8` signifying the length of data in the request.
|
|
|
|
|
|
|
|
Response messages will always be prefixed by the originating request _token_, directly followed by that request's _response flags_, then the response payload length:
|
|
|
|
| Bit 7 | Bit 6 | Bit 5 | Bit 4 | Bit 3 | Bit 2 | Bit 1 | Bit 0 |
|
|
| -- | -- | -- | -- | -- | -- | -- | -- |
|
|
| `-` | `-` | `-` | `-` | `-` | `-` | `-` | `SUCCESS` |
|
|
|
|
* Bit 0 (`SUCCESS`): When this bit is set, the request was successfully handled. If not set, all payload data should be disregarded, and the request retried if appropriate (with a new token).
|
|
|
|
|
|
### Example "conversation":
|
|
|
|
**Request** -- version query:
|
|
|
|
| Byte | 0 | 1 | 2 | 3 | 4 |
|
|
| --- | --- | --- | --- | --- | --- |
|
|
| **Purpose** | Token | Token | Payload Length | Route | Route |
|
|
| **Value** | `0x43` | `0x2B` | `0x02` | `0x00` | `0x00` |
|
|
|
|
**Response** -- matching token, successful flag, payload of `0x03170192` = 3.17.192:
|
|
|
|
| Byte | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 |
|
|
| --- | --- | --- | --- | --- | --- | --- | --- | --- |
|
|
| **Purpose** | Token | Token | Response Flags | Payload Length | Payload | Payload | Payload | Payload |
|
|
| **Value** | `0x43` | `0x2B` | `0x01` | `0x04` | `0x92` | `0x01` | `0x17` | `0x03` |
|
|
|
|
## Routes
|
|
|
|
Subsystem validity should be queried through the “Enabled-in-firmware subsystem query” under the QMK subsystem (route=0x00,0x01).
|
|
This is the primary method for determining if a subsystem has been enabled in the running firmware.
|
|
|
|
|
|
### XAP - `0x00`
|
|
This subsystem is always present, and provides the ability to query information about the XAP protocol of the connected device.
|
|
|
|
|
|
| Name | Route | Tags | Payloads | Description |
|
|
| -- | -- | -- | -- | -- |
|
|
| Version Query | `0x00 0x00` | |__Response:__ `u32`| XAP protocol version query.<br><br>* Returns the BCD-encoded version in the format of XX.YY.ZZZZ => `0xXXYYZZZZ`<br> * e.g. 3.2.115 will match `0x03020115`, or bytes {0x15,0x01,0x02,0x03}.|
|
|
|
|
|