mirror of
https://github.com/qmk/qmk_firmware.git
synced 2024-12-15 22:23:21 +00:00
cd0e32ff9e
* Initial support for the Keyboardio Atreus Many thanks to noroadsleft for reviews & suggestions. * Add QMK Configurator layout support * Update the fn layer of the Keyboardio Atreus to the new layout. Previously this was using the Classic Atreus layout. * Implement noroadleft's changes from #8492 * Follow Erovia's recommendations qmk/qmk_firmware#8492 * Correct braces * Change correct rules.mk * Remove comments * Fix BOOTMAGIC_ENABLE I had edited the wrong file earlier. * Remove comment * Updates rules.mk Thank you noroadsleft. Co-authored-by: Gergely Nagy <algernon@keyboard.io> Co-authored-by: Phil Hagelberg <phil@hagelb.org>
32 lines
1.5 KiB
Markdown
32 lines
1.5 KiB
Markdown
# Keyboardio Atreus
|
|
|
|
![Atreus](https://atreus.technomancy.us/i/atreus2-mug.jpg)
|
|
|
|
A small mechanical keyboard that is based around the shape of the human hand.
|
|
|
|
* Keyboard Maintainer: [Keyboardio](https://github.com/keyboardio)
|
|
* Hardware Supported: Keyboardio Atreus
|
|
* Hardware Availability: https://www.kickstarter.com/projects/keyboardio/atreus
|
|
|
|
These configuration files are specifically for the Keyboardio Atreus, a
|
|
collaboration between [Phil Hagelberg](https://github.com/technomancy) and
|
|
[Keyboardio](https://github.com/keyboardio). The keyboard is currently on
|
|
Kickstarter, and will come fully assembled.
|
|
|
|
Make example for this keyboard (after setting up your build environment):
|
|
|
|
make keyboardio/atreus:default
|
|
|
|
Flashing example for this keyboard:
|
|
|
|
make keyboardio/atreus:default:flash
|
|
|
|
*Unlike the TMK firmware, these commands should be run from the root of the repository, not the directory containing this readme.*
|
|
|
|
To flash new firmware, the keyboard needs to be in bootloader mode. To do that,
|
|
one needs to hold the bottom left key (`Esc` by default) and reset the
|
|
keyboard - either via a macro, or by sending a hang-up signal to the keyboard
|
|
device, or by pressing the reset button on the bottom with a pin.
|
|
|
|
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|