mirror of
https://github.com/qmk/qmk_firmware.git
synced 2024-11-27 05:36:52 +00:00
bdd1f318c3
Co-authored-by: Drashna Jaelre <drashna@live.com> Co-authored-by: mtei <2170248+mtei@users.noreply.github.com> Co-authored-by: Nick Brassel <nick@tzarc.org>
1.6 KiB
1.6 KiB
1k
1% Custom mechanical keyboard. ATtiny85 powered, with 1*WS2812 LED, and the micronucleus bootloader.
Note: Due to limited firmware space, a lot of features have to be disabled to get a functioning QMK based keyboard.
- Keyboard Maintainer: MakotoKurauchi
- Hardware Supported: 1k
- Hardware Availability: booth
Make example for this keyboard (after setting up your build environment):
make 1k:default
See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.
Flashing
Prerequisites
git clone https://github.com/micronucleus/micronucleus.git
cd micronucleus/commandline/
sudo make install
On Linux, you’ll need proper privileges to access the MCU. You can either use sudo when flashing firmware, or place these files in /etc/udev/rules.d/. Once added run the following:
sudo udevadm control --reload-rules
sudo udevadm trigger
Instructions
make 1k:default:flash
# or directly with...
micronucleus --run <firmware.hex>