mirror of
https://github.com/qmk/qmk_firmware.git
synced 2024-11-25 04:43:02 +00:00
38 lines
1.4 KiB
Markdown
38 lines
1.4 KiB
Markdown
# meck_tkl
|
|
|
|
|
|
|
|
A standard tenkeyless keyboard, using STM32 Blackpill.
|
|
|
|
* Keyboard Maintainer: [Gabriel Kim](https://github.com/gabrielkim13)
|
|
* Hardware Supported: Blackpill F401
|
|
* Hardware Availability: [Thingiverse: Mechanical Keyboard - MECH - TKL](https://www.thingiverse.com/thing:4225961)
|
|
|
|
Make example for this keyboard (after setting up your build environment):
|
|
|
|
make handwired/meck_tkl:default
|
|
|
|
Flashing example for this keyboard:
|
|
|
|
make handwired/meck_tkl:default:flash
|
|
|
|
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
|
|
|
## Bootloader
|
|
|
|
Enter the bootloader in 3 ways:
|
|
|
|
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
|
|
* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
|
|
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
|
|
|
|
## Wiring instructions
|
|
|
|
- On Blackpill boards, **avoid** using the following pins, since they will cause either USB enumeration or the DFU bootloader to not work correctly:
|
|
- **USB-related pins:** `PA10`, `PA11`, `PA12`
|
|
- **BOOT1 pin:** `PB2`
|
|
|
|
Sample wiring:
|
|
|
|
|