mirror of
https://github.com/qmk/qmk_firmware.git
synced 2024-11-27 05:36:52 +00:00
46fe3b0cf5
Co-authored-by: Drashna Jaelre <drashna@live.com> Co-authored-by: Tom Barnes <barnestom@me.com>
1.4 KiB
1.4 KiB
Hardware Abstraction Handwire
A hotswap 60% keyboard with an arrow key cluster. Board features support for an OLED screen, push pull solenoid, and an active buzzer.
- Keyboard Maintainer: Andy Tsai
- Hardware Supported: ATMEGA32U4, Push-Pull Solenoid, Active Buzzer, SSD1306 128x32 OLED
- Hardware Availability: https://hardwareabstraction.com
Make example for this keyboard (after setting up your build environment):
make hardwareabstraction/handwire:default
Flashing example for this keyboard:
make hardwareabstraction/handwire:default:flash
See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.
Bootloader
Enter the bootloader in 3 ways:
- Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
- Physical reset button: Briefly press the button on the top left side of the PCB. You can alternatively short the two pads vertically with a pair of tweezers.
- Keycode in layout: Press the key mapped to
QK_BOOTif it is available. This can be configured in VIA or on the QMK configurator.