mirror of
https://github.com/qmk/qmk_firmware.git
synced 2024-12-15 14:13:27 +00:00
26 lines
1.7 KiB
Markdown
26 lines
1.7 KiB
Markdown
# Zen Keyboard
|
|
|
|
A split ergo keyboard with a few goals in mind:
|
|
|
|
- Be as thin as possible. Other split KBs (Let's Split, Nyquist, Iris) are 15.2mm thick. The Zen rev2 is only 13.2mm thick *including switches and caps* when using Kailh Choc low-profile switches, and 22.1mm using standard MX switches and DSA keycaps.
|
|
- Layout designed for gaming. 1.5u pinky keys, ortho alphas, and angled thumb keys. After trying Ortholinear, Atreus62, and Ergodox, this is the best layout for gaming and typing.
|
|
- Per-key RGB lighting. 34 WS2812b LEDs per side make it exceptionally bright
|
|
- Price. Using Arduino Pro Micro, SK6812 LEDs, and PCB FR4 for the case, the cost of each half without switches or caps can be reduced to under $20 when purchased at volume.
|
|
- Options. The Zen rev2 comes with rotary encoder support, SSD1306 OLED pinout, USB-C or TRRS interconnect, and jumpers to enable compatibility with the [QMK Proton-C](https://olkb.com/parts/qmk-proton-c) and the [Keeb.io Elite-C](https://keeb.io/products/elite-c-usb-c-pro-micro-replacement-arduino-compatible-atmega32u4)
|
|
|
|
Keyboard Maintainer: [Legonut](https://github.com/Legonut)
|
|
Hardware Supported: Zen rev1, Zen rev2
|
|
Hardware Availability: [RGBKB.net](https://www.rgbkb.net/)
|
|
|
|
A build guide and more info for this keyboard can be found here: [Zen Build Guide](https://rgbkb.gitbook.io/sol-build-guide/zygomorph-build-guide/untitled).
|
|
|
|
Make example for this keyboard (after setting up your build environment):
|
|
|
|
make rgbkb/zen/rev2:default
|
|
|
|
To build for a Proton-C:
|
|
|
|
make rgbkb/zen/rev2:default CONVERT_TO=proton_c
|
|
|
|
See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information.
|