mirror of
https://github.com/qmk/qmk_firmware.git
synced 2024-12-15 14:13:27 +00:00
40 lines
1.3 KiB
Markdown
40 lines
1.3 KiB
Markdown
# 3dortho14u
|
|
|
|
|
|
|
|
A symmetrical 14u wide ortholinear keyboard.
|
|
|
|
In addition to the 3d printed parts and microcontroller, the following hardware is required:
|
|
* 8 * 12 mm M3 bolt
|
|
* Either:
|
|
* 8 * M3 muts and CA glue
|
|
OR
|
|
* 8 * 3x3 mm threaded insert
|
|
* Optional:
|
|
* USB daughter board
|
|
|
|
---
|
|
|
|
* Keyboard Maintainer: [xia0](https://github.com/xia0)
|
|
* Hardware Supported:
|
|
* Arduino Pro Micro (ATmega32u4)
|
|
* Hardware Availability: [github](https://github.com/xia0/keeb_files/tree/main/3dortho14u)
|
|
|
|
Make example for this keyboard (after setting up your build environment):
|
|
|
|
make 3dortho14u/rev2:default
|
|
|
|
Flashing example for this keyboard:
|
|
|
|
make 3dortho14u/rev2:default:flash
|
|
|
|
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
|
|
|
## Bootloader
|
|
|
|
Enter the bootloader in 3 ways:
|
|
|
|
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
|
|
* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
|
|
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
|