mirror of
https://github.com/qmk/qmk_firmware.git
synced 2024-12-23 18:09:53 +00:00
35 lines
1.8 KiB
Markdown
35 lines
1.8 KiB
Markdown
# ai
|
|
|
|
|
|
|
|
This is a small open source 5x4-1 macropad powered by QMK
|
|
|
|
* Keyboard Maintainer: [Louis Dalibard](https://github.com/make42)
|
|
* Hardware Supported: The PCB for ai is located here: [ai](https://github.com/make42/ai)
|
|
* Hardware Availability: Here is a complete BOM with links to where you can find parts:
|
|
* PCB (I personally used JLCPCB)
|
|
* Arduino Pro Micro ([Aliexpress](https://fr.aliexpress.com/item/32768308647.html?spm=a2g0o.order_list.0.0.3ccc5e5bU64POK&gatewayAdapt=glo2fra))
|
|
* Female pin rows ([Aliexpress]https://fr.aliexpress.com/item/4001122376295.html?spm=a2g0o.order_list.0.0.23845e5bTBt8sp&gatewayAdapt=glo2fra))
|
|
* Gateron hotswap sockets ([Aliexpress](https://fr.aliexpress.com/item/1005003129613578.html?spm=a2g0o.order_list.0.0.23845e5bTBt8sp&gatewayAdapt=glo2fra))
|
|
* Zener diodes ([Aliexpress](https://fr.aliexpress.com/item/1005003276184193.html?spm=a2g0o.order_list.0.0.23845e5bTBt8sp&gatewayAdapt=glo2fra))
|
|
* Keyswitches (use a compatible MX switch)
|
|
* Keycaps (Duh)
|
|
|
|
Make example for this keyboard (after setting up your build environment):
|
|
|
|
make ai:default
|
|
|
|
Flashing example for this keyboard:
|
|
|
|
make ai:default:flash
|
|
|
|
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
|
|
|
## Bootloader
|
|
|
|
Enter the bootloader in 3 ways:
|
|
|
|
- **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
|
|
- **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
|
|
- **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
|