gitbot/qmk_firmware
0
0
Fork 0
mirror of https://github.com/qmk/qmk_firmware.git synced 2024-12-23 09:59:53 +00:00
Code Issues Packages Projects Releases Wiki Activity
2d45e5e4b4
qmk_firmware/keyboards/4pplet/eagle_viper_rep/readme.md
4pplet d7f352de98
Adding "Eagle Viper Rep", open sourced Eagle/Viper V2/V3 PCB (#13020) 
* adding revision A

* Update keyboards/4pplet/eagle_viper_rep/rev_a/rev_a.c

Co-authored-by: Drashna Jaelre <drashna@live.com>

* Update keyboards/4pplet/eagle_viper_rep/rev_a/rev_a.c

Co-authored-by: Drashna Jaelre <drashna@live.com>

* Update keyboards/4pplet/eagle_viper_rep/rev_a/rev_a.c

Co-authored-by: Drashna Jaelre <drashna@live.com>

* Update keyboards/4pplet/eagle_viper_rep/rev_a/rev_a.h

Co-authored-by: Drashna Jaelre <drashna@live.com>

* Update keyboards/4pplet/eagle_viper_rep/rev_a/rev_a.c

Co-authored-by: Drashna Jaelre <drashna@live.com>

* Update readme.md

Adding instruction on how to enter bootloader

* adding instruction on how to enter bootloader (DFU)

adding instruction on how to enter bootloader (DFU)

* updated description

* Update keyboards/4pplet/eagle_viper_rep/rev_a/halconf.h

Co-authored-by: Nick Brassel <nick@tzarc.org>

* Update keyboards/4pplet/eagle_viper_rep/rev_a/rev_a.c

Co-authored-by: Nick Brassel <nick@tzarc.org>

* Update keyboards/4pplet/eagle_viper_rep/rev_a/config.h

Co-authored-by: Nick Brassel <nick@tzarc.org>

* Update keyboards/4pplet/eagle_viper_rep/rev_a/chconf.h

Co-authored-by: Nick Brassel <nick@tzarc.org>

* Update keyboards/4pplet/eagle_viper_rep/rev_a/chconf.h

Co-authored-by: Nick Brassel <nick@tzarc.org>

* Update keyboards/4pplet/eagle_viper_rep/keymaps/default/keymap.c

Co-authored-by: Nick Brassel <nick@tzarc.org>

* Restoring palSetLineMode for working underglow

I was experiencing the same issue as this: https://github.com/qmk/qmk_firmware/issues/12655#issuecomment-844104659

sigprof helped me resolve this issue.

* Update rev_a.c

removing palSetLineMode again, works great after rebase. Thanks!

Co-authored-by: Drashna Jaelre <drashna@live.com>
Co-authored-by: Nick Brassel <nick@tzarc.org>
2021-06-22 08:09:16 +10:00

1.2 KiB
Raw Blame History

Viper/Eagle REP Rev A

A alternative PCB for Viper and Eagle V2 and V3

  • Keyboard Maintainer: 4pplet
  • Hardware Supported: Viper/Eagle REP Rev A

Make example for this keyboard (after setting up your build environment):

make 4pplet/eagle_viper_rep/rev_a:default

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

How to enter bootloader (DFU):

  • Press and hold the button on the keyboard (the small one on the same side as the MCU) for more than 1 second. The keyboard will then enter bootloader (DFU) mode and it's ready to flash the firmware.
  • Note: If holding the button a shorter time, the keyboard will just reset. If you want to exit bootloader mode without flashing a firmware, dissconnect the keyboard from your PC and reconnect it.

Alternative option if the firmware is already pre-flashed:

  • Unplug your keyboard, hold down the Spacebar and B at the same time, plug in your keyboard and wait a second before releasing the keys. Bootmagic lite is enabled by default.