mirror of
https://github.com/qmk/qmk_firmware.git
synced 2024-11-25 20:56:42 +00:00
46fe3b0cf5
Co-authored-by: Drashna Jaelre <drashna@live.com> Co-authored-by: Tom Barnes <barnestom@me.com>
28 lines
1.4 KiB
Markdown
28 lines
1.4 KiB
Markdown
# Hardware Abstraction Handwire
|
|
|
|
|
|
|
|
A hotswap 60% keyboard with an arrow key cluster. Board features support for an OLED screen, push pull solenoid, and an active buzzer.
|
|
|
|
* Keyboard Maintainer: [Andy Tsai](https://github.com/cgmandy)
|
|
* Hardware Supported: ATMEGA32U4, Push-Pull Solenoid, Active Buzzer, SSD1306 128x32 OLED
|
|
* Hardware Availability: https://hardwareabstraction.com
|
|
|
|
Make example for this keyboard (after setting up your build environment):
|
|
|
|
make hardwareabstraction/handwire:default
|
|
|
|
Flashing example for this keyboard:
|
|
|
|
make hardwareabstraction/handwire:default:flash
|
|
|
|
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
|
|
|
## Bootloader
|
|
|
|
Enter the bootloader in 3 ways:
|
|
|
|
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
|
|
* **Physical reset button**: Briefly press the button on the top left side of the PCB. You can alternatively short the two pads vertically with a pair of tweezers.
|
|
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available. This can be configured in VIA or on the QMK configurator.
|