mirror of
https://github.com/qmk/qmk_firmware.git
synced 2024-12-25 19:09:54 +00:00
539cc45fba
* Fujitsu T111 keyboard * info.json: fixed missing key on top row * info.json: fixed name and maintaner fields * Update keyboards/handwired/t111/keymaps/oleg/keymap.c * Update keyboards/handwired/t111/config.h * Update keyboards/handwired/t111/keymaps/oleg/keymap.c * Update keyboards/handwired/t111/keymaps/oleg/keymap.c * Apply suggestions from code review * Update keyboards/handwired/t111/readme.md
46 lines
2.2 KiB
Markdown
46 lines
2.2 KiB
Markdown
# QMK-based firmware for Fujitsu N860-2500-T111 keyboard
|
|
|
|
|
|
|
|
Fujitsu N860-2500-T111 keyboard conversion project: direct connection of Black Pill to the matrix.
|
|
|
|
* Keyboard Maintainer: [DmNosachev](https://github.com/DmNosachev)
|
|
* Hardware Supported: [Fujitsu N860-2500-T111](https://deskthority.net/viewtopic.php?t=17087), Black Pill STM32F103C8T6 MCU board. Alternatively you can use any MCU which is supported by QMK and has 22 or more IO pins: Arduino Micro, Teensy 2.0, Teensy 2.0++, Blue Pill, etc.
|
|
* Thanks to Deskthority user *OldIsNew* for the matrix decoding.
|
|
|
|
Make example for this keyboard (after setting up your build environment):
|
|
|
|
make handwired/t111:default
|
|
|
|
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
|
|
|
# Modding
|
|
|
|
## Matrix
|
|
|
|
Fujitsu N860-2500-T111 has 14x8 matrix. It's ghost-free thanks to the diodes.
|
|
|
|
Rows (0-7) and columns (0-D):
|
|
|
|
|
|
## Black Pill
|
|
Suggested mount position for the Black Pill (view from the top side of the PCB):
|
|
|
|
```
|
|
C1 C2 C3 C4 C7 C8 C9 CA R5 R6
|
|
,--------------------------------------------------------------------,
|
|
|B11 B10 B1 B0 A7 A6 A5 A4 A3 A2 A1 A0 RST C13 B9 B8 GND |---,
|
|
| |USB|
|
|
|B12 B13 B14 B15 A8 A9 A10 A11 A12 A15 B3 B4 B5 B6 B7 3V3 GND |---'
|
|
'--------------------------------------------------------------------'
|
|
CC CD C0 CB C6 C5 R0 R4 R3 R2 R1 R7
|
|
```
|
|
|
|
|
|
|
|
1. Desolder all ICs, capacitors and resistors.
|
|
1. Solder 4-pin SWD header to Black Pill.
|
|
2. Burn [STM32duino bootloader](https://github.com/rogerclarkmelbourne/STM32duino-bootloader/blob/master/bootloader_only_binaries/generic_boot20_pb12.bin) to Black Pill.
|
|
3. Compile and flash the firmware: `make handwired/t111:default:flash`
|
|
4. Connect rows and columns to the corresponding pins of the Black Pill.
|