mirror of
https://github.com/qmk/qmk_firmware.git
synced 2024-11-25 04:43:02 +00:00
38 lines
1.5 KiB
Markdown
38 lines
1.5 KiB
Markdown
# CHORD ZERO Stenographic Keyboard
|
|
|
|
|
|
|
|
CHORD ZERO is a stenographic keyboard that can be used with
|
|
[Plover](https://www.openstenoproject.org/plover/) or any other application
|
|
that supports the [TX
|
|
Bolt](https://docs.qmk.fm/#/feature_stenography?id=tx-bolt) or
|
|
[GeminiPR](https://docs.qmk.fm/#/feature_stenography?id=geminipr) protocol.
|
|
|
|
* Keyboard Maintainer: [Simon Hengel](https://github.com/sol)
|
|
* Hardware Supported: REV 0, REV 1
|
|
* Hardware Availability: https://github.com/sol/chord-zero#readme
|
|
|
|
Make example for this keyboard (after setting up your build environment):
|
|
|
|
make chord/zero:default
|
|
|
|
or
|
|
|
|
qmk compile -kb chord/zero -km default
|
|
|
|
This will generate `chord_zero_default.uf2`.
|
|
|
|
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
|
|
|
## Bootloader
|
|
|
|
Enter the bootloader in 3 ways:
|
|
|
|
* **Reset key combo**: Press the six keys at the outer columns on each side of the keyboard simultaneously while it is plugged in
|
|
* **Bootmagic reset**: Hold down the top left key and plug in the keyboard
|
|
* **Physical reset button**: Press the button on the back of the PCB and plug in the keyboard
|
|
|
|
Once the keyboard is in bootloader mode you can mount it as a USB mass storage
|
|
device and copy the firmware (the file `chord_zero_default.uf2`) onto it. Once
|
|
copying is completed the keyboard will reboot automatically.
|