mirror of
https://github.com/qmk/qmk_firmware.git
synced 2024-12-21 00:53:23 +00:00
8d1255ccab
* Handwired/Stream_Cheap/2x4: Add via support Signed-off-by: Luigi311 <luigi311.lg@gmail.com> * Handwired/Stream_Cheap: Update readme for via Signed-off-by: Luigi311 <luigi311.lg@gmail.com> * Handwired/Stream_Cheap/2x4: Add 2x4 to via json Signed-off-by: Luigi311 <luigi311.lg@gmail.com> * Handwired/Stream_Cheap/2x4: Add GPL2+ License to keymap Signed-off-by: Luigi311 <luigi311.lg@gmail.com>
25 lines
1.0 KiB
Markdown
25 lines
1.0 KiB
Markdown
# Stream Cheap
|
|
|
|
An ortholinear macropad, available in 2x3, 2x4, and 2x5 sizes.
|
|
|
|
Hardware:
|
|
* 3d printed switch plate
|
|
* 6-10 key switches
|
|
* 3d printed case
|
|
* Handwired in Direct Pins mode (i.e. all switches share a common GND and are wired to their own pin)
|
|
* Uses a Pro Micro
|
|
* Includes a reset switch accessible by a hole on the bottom
|
|
|
|
* Keyboard Maintainer: [hartk1213](https://github.com/hartk1213)
|
|
* Hardware Supported: Pro Micro
|
|
* Hardware Availability: [Thingiverse](https://www.thingiverse.com/thing:4497991)
|
|
|
|
Make example for this keyboard (after setting up your build environment):
|
|
|
|
make handwired/stream_cheap/2x3:default
|
|
make handwired/stream_cheap/2x4:default
|
|
make handwired/stream_cheap/2x4:via
|
|
make handwired/stream_cheap/2x5:default
|
|
|
|
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|