mirror of
https://github.com/qmk/qmk_firmware.git
synced 2024-12-18 07:33:26 +00:00
a3e057e779
* keyboard:akira initial commit * Update keyboards/ekow/akira/akira.h Co-authored-by: Joel Challis <git@zvecr.com> * Update keyboards/ekow/akira/keymaps/via/rules.mk Co-authored-by: Joel Challis <git@zvecr.com> * Update keyboards/ekow/akira/readme.md Co-authored-by: Joel Challis <git@zvecr.com> * Update .gitignore Co-authored-by: Joel Challis <git@zvecr.com> * Update readme.md * Update keyboards/ekow/akira/rules.mk Co-authored-by: Drashna Jaelre <drashna@live.com> * Update rules.mk remove redundant content. * added keyboard/ekow/keymaps/via/keymap.c * remove .ccls-cache * add instructions of enter the bootloader * add instructions of enter the bootloader * modify ekow/akira:via * Update keyboards/ekow/akira/readme.md Co-authored-by: Ryan <fauxpark@gmail.com> * Update keyboards/ekow/akira/keymaps/via/rules.mk Co-authored-by: Ryan <fauxpark@gmail.com> Co-authored-by: Joel Challis <git@zvecr.com> Co-authored-by: Drashna Jaelre <drashna@live.com> Co-authored-by: Ryan <fauxpark@gmail.com>
25 lines
1.0 KiB
Markdown
25 lines
1.0 KiB
Markdown
# AKIRA
|
|
|
|
* Keyboard Maintainer: [eugenepy](https://github.com/eugenepy)
|
|
* Hardware Supported: AKIRA pcb, both Hotswap and solderable.
|
|
* Hardware Availability: Not yet on groupbuy
|
|
|
|
# Build
|
|
Make example for this keyboard (after setting up your build environment):
|
|
|
|
make ekow/akira:default
|
|
|
|
Flashing example for this keyboard:
|
|
|
|
make ekow/akira:default:flash
|
|
|
|
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
|
|
|
## Bootloader
|
|
|
|
Enter the bootloader in 3 ways:
|
|
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
|
|
* **Physical reset button**: Briefly press the Buttom on the back of the PCB, the board will enter the dfu-mode, no extra pads need to short.
|
|
* **Keycode in layout**: Press the key mapped to `RESET` if it is available
|
|
|