mirror of
https://github.com/qmk/qmk_firmware.git
synced 2024-11-27 21:50:12 +00:00
3c26f07f5a
* Grammatical fixes for GPIO Control doc I found the Advanced Settings section to be poorly written. * Commit suggestions from fauxpark * Change first instance of "microcontroller" to match suggestion
24 lines
1.6 KiB
Markdown
24 lines
1.6 KiB
Markdown
# GPIO Control
|
|
|
|
QMK has a GPIO control abstraction layer which is microcontroller agnostic. This is done to allow easy access to pin control across different platforms.
|
|
|
|
## Functions
|
|
|
|
The following functions can provide basic control of GPIOs and are found in `quantum/quantum.h`.
|
|
|
|
|Function |Description |
|
|
|----------------------|------------------------------------------------------------------|
|
|
|`setPinInput(pin)` |Set pin as input with high impedance (High-Z) |
|
|
|`setPinInputHigh(pin)`|Set pin as input with build in pull-up |
|
|
|`setPinInputLow(pin)` |Set pin as input with build in pull-down (Supported only on STM32)|
|
|
|`setPinOutput(pin)` |Set pin as output |
|
|
|`writePinHigh(pin)` |Set pin level as high, assuming it is an output |
|
|
|`writePinLow(pin)` |Set pin level as low, assuming it is an output |
|
|
|`writePin(pin, level)`|Set pin level, assuming it is an output |
|
|
|`readPin(pin)` |Returns the level of the pin |
|
|
|
|
## Advanced Settings
|
|
|
|
Each microcontroller can have multiple advanced settings regarding its GPIO. This abstraction layer does not limit the use of architecture-specific functions. Advanced users should consult the datasheet of their desired device and include any needed libraries. For AVR, the standard avr/io.h library is used; for STM32, the ChibiOS [PAL library](http://chibios.sourceforge.net/docs3/hal/group___p_a_l.html) is used.
|
|
|